There are many different types of check valves. You can purchase standard ones at any home improvement store, or you can order custom-made ones to fit a specific application. Check valves are constantly being improved, so there's no need to settle for what you find on the shelf. Listed below are some different types of check valves:
Spring-loaded
If you need to shut off a flow of fluid in one direction, a spring-loaded check valve is the way to go. This type of valve works by using a metal wire wrapped around a cylinder and is specially formulated to provide additional elasticity. This elasticity helps the valve return to its original position, but as it is used, the spring becomes less supple. Therefore, it's important to ensure that the valve is installed correctly to avoid any potential problems.
A spring-loaded check valve has five basic parts, although the details may vary by model. First, the body is the unit that is inserted into the pipeline or cistern. The body has a cylindrical or spherical cavity with a seat located in the cross section. The seat is held in place by a spring that is located on the downstream side of the check valve.
The spring-loaded check valve has a variety of functions. These devices must be able to handle pressure and flow. Moreover, the materials used in the construction of the check valve must be compatible with the media. These devices are frequently installed in water pipelines to prevent backflow into the house or the upstream line. They are also used in gas systems, reverse osis systems, and engine and water treatment plants.
Silent
Silent check valves are designed to eliminate surges and reduce hydraulic shock. They are used in many types of liquid and air applications. They are available in a wide variety of materials, sizes, and pressure classes. Depending on your needs, you can select one that is suitable for your needs. This valve also offers several benefits over conventional check valves, including the ability to be used in a range of applications.
Silent check valves are very effective at eliminating water hammer, which is an undesirable effect of reverse flow. They are also silent, allowing you to operate your equipment without interruption. Silent check valves are also very low maintenance and cost-effective. They can be installed in vertical or horizontal pipelines. They are recommended for use in heating systems and condensate return lines. They are also Factory Mutual System approved for use in fire protection systems.
Lead-free silent check valves are also available. These valves have a lead-free cast copper silicon alloy body and are NSF/ANSI 372 certified for lead-free components. They are a good choice for commercial water applications.
aikevalve.com