Industry News

Home / News / Industry News
  • A brass ball valve is an ideal choice for many applications

    A brass ball valve is an ideal choice for many applications and is available in a variety of materials, including lead-free brass, stainless steel, polymer, and bronze. These valves are incredibly versatile and can be found in different sizes and configurations. These valves are available in standard and full port designs, as well as a number of different connection types, including push-fit, flared, and threaded connections.A brass ball valve has a lever that is usually placed in an open positi...

    2022-11-17

  • There are many different types of check valves

    There are many different types of check valves. You can purchase standard ones at any home improvement store, or you can order custom-made ones to fit a specific application. Check valves are constantly being improved, so there's no need to settle for what you find on the shelf. Listed below are some different types of check valves:Spring-loadedIf you need to shut off a flow of fluid in one direction, a spring-loaded check valve is the way to go. This type of valve works by using a metal wire wr...

    2022-11-12

  • A Brass Check Valve is used to prevent backflow of compatible fluids

    A Brass Check Valve is used to prevent backflow of compatible fluids. They are available in a wide range of sizes, from 1/4" to 4" in diameter. They are typically used in water treatment applications. There are several types of Brass Check Valve, each with different characteristics. Read on to learn about the different types and their applications.A brass check valve allows a single flow of fluid and prevents backflow. Backflow can damage other parts of a system or cause contamination. This type...

    2022-11-04

  • Choosing a Check Valve

    A Check Valve is a type of valve that prevents backflow in a piping system. They differ from gate and globe valves because they do not use handwheels to operate and instead rely on pressure or gravity to control the flow. One of the most common types of Check Valves is the swing valve.When choosing a check valve, the selection process should start with a thorough analysis of the requirements of the application. There are many factors that must be considered, including the line size, pressure gra...

    2022-10-29

  • What Is a Check Valve?

    The Check Valve is a self-operating valve used in a wide variety of applications. Its purpose is to permit flow in one direction and prevent reverse flow. There are a number of factors that will affect the type of check valve you choose. These factors include cost, initial familiarity, required maintenance, and process media. One of the most common problems with check valves is water hammer. This is a result of water pressure rising too quickly. It can also be caused by improper installation or ...

    2022-10-21

  • What Is a Check Valve?

    A Check Valve is a mechanical device that limits or prevents the flow of fluids or gases through a pipe. They are generally self-operated valves that allow one direction of flow and prevent the opposite flow. Different types of check valves are suitable for different applications. Some features to consider when choosing a Check Valve include cost, ease of use, maintenance requirements, piping orientation, and process media.Check valves are a common component of plumbing systems. These valves ens...

    2022-10-14

  • Valve construction and installation points

    1) The installation position, height, and direction of import and export must meet the design requirements, and the connection should be firm and tight.2) For all kinds of manual valves installed on the thermal insulation pipeline, the handle shall not be downward.3) Visual inspection must be carried out before the valve is installed, and the nameplate of the valve should comply with the current national standard "General Valve Mark" GB 12220. For valves with a working pressure greater than 1.0 ...

    2022-10-09

  • Ball valve installation precautions

    (1) The disassembly and decomposition operation must be carried out only after it is confirmed that the upper and downstream pipelines of the ball valve have been depressurized.(2) Non-metal parts should be removed from the cleaning agent immediately after cleaning, and should not be soaked for a long time.(3) The bolts on the flange must be tightened symmetrically, gradually and evenly during assembly.(4) The cleaning agent should be compatible with the rubber parts, plastic parts, metal parts ...

    2022-09-29

  • Disadvantages of ball valve

    ①Because the most important valve seat sealing ring material of the ball valve is PTFE, it is inert to almost all chemical substances, and has a small friction coefficient, stable performance, not easy to age, wide temperature range and excellent sealing performance comprehensive characteristics. But the physical properties of PTFE, including high coefficient of expansion, susceptibility to cold flow, and poor thermal conductivity, require that seat seal designs must be built around these proper...

    2022-09-23